半自動視覺檢測載帶包裝機－方向與缺件檢測控制
YXSJ-10-014-IR-2 半自動視覺檢測載帶包裝機專為需要人工放置並結合視覺檢測控制的 SMT 包裝應用而設計。
配備直覺式人機介面與腳踏式封合操作，可由單一操作人員使用，包裝速度可自由調整，依元件操作方式不同，約為5,000–8,000 pcs/hour。
YXSJ-10-014-IR-2 半自動視覺檢測載帶包裝機適用於偏好人工放置但同時需要檢測控制的 SMT 包裝情境。單一操作人員將元件手動放入載帶後，透過穩定的腳踏式封合流程，將載帶與上蓋帶封合。包裝速度由操作人員控制，依元件類型與放置節奏不同，通常可達5,000–8,000 pcs/hour。
相較於標準半自動包裝機，此機型新增視覺檢測功能，用於辨識產品方向與缺件安裝。當檢測到 NG 狀況時，系統將警示並自動停止，以防止不良品持續包裝。可調式導軌系統支援8–88 mm載帶寬度，並相容於冷封（自黏式）與熱壓製程，使其成為需要人工彈性且具較高品質控管之 SMD 包裝產線的精巧且具彈性的解決方案。
| Item | Specification |
|---|---|
| Model | YXSJ-10-014-IR-2 |
| Machine Type | Semi-Automatic Visual Inspection Carrier Tape Packaging Machine |
| Operation Mode | Single-operator manual placement + HMI operation |
| Packaging Process | Manually place product into carrier tape → start device switch → seal carrier tape & cover tape together |
| Packaging Speed | 5,000 – 8,000 pcs/hour (depends on manual placement speed) |
| Speed Control | Freely controlled by operator |
| Applicable Carrier Tape Width | 8 – 88 mm (conventional range) |
| Width Adjustment | Manual adjustment via machine guide rails |
| Sealing Control | Foot pedal sealing control |
| Sealing Methods | Cold sealing (self-adhesive) / Hot pressing |
| Inspection Functions | Detect product direction and missing installation |
| NG Handling | Automatic alarm and shutdown when NG is detected |
| Applicable Products | All SMD products and carrier tape packaging |
| Working Voltage | AC 220V, 50Hz |
| Power Consumption | 300 W |
| Air Pressure Requirement | Approx. 3.0 kg/cm² |
| Machine Dimensions | 1300 × 600 × 500 mm (L × W × H) |
| Machine Weight | Approx. 55 kg |